MIL-M-38510-124 Microcircuits, Linear, Precision Voltage References, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, precision voltage references. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31

TABLE III. Group A inspection for all device type 05.

subgroup	symbol	Test no.	Conditions see figures 3, 4, and 5 unless otherwise specified		Measured value	Equation	Limits		Unit
subgroup	symbol	Test no.	Voltage	Current	Measured value	Equation	Min	Max	Unit
1 TA = +25°C	VR1 VR2 VR3	1 2 3	Vs = 30 V Vs = 30 V Vs = 30 V	IR = .5 mA IR = 1.0 mA IR = 10 mA			6.80 6.80 6.80	7.10 7.10 7.10	V
	VR current	4	Vs = 30 V	.5 mA = IR = 10 mA		VR = VR1 - VR3	-9	9	mV
	NO	5	Vs = 30 V	IR = 1.0 mA	VR4	NO = VR4	0	20	∝V RMs
	NO	5	BW = 10 Hz to 10 kHz		VR4	NO = VR4	0	20	∝V RMs
	Is	6	Vs = 40 V	IR = 0 mA			4	20	mA
2 TA = +85°C	VR I T	7	Vs = 30 V	IR = 1.0 mA	VR5		---	---	---
2 TA = +125°C	VR current	8 9	Vs = 30 V Vs = 30 V	IR = 0.5 mA IR = 10 mA	VR6 VR7	VR = VR6 - VR7	-12	12	mV
2 TA = +125°C	VR I T	10	Vs = 30 V	IR = 1.0 mA	VR8	VR I T = (VR8 - VR5 ) I 40	-10	10	ppm I °C
3 TA = -55°C	VR current	11 12	Vs = 30 V Vs = 30 V	IR = 0.5 mA IR = 10 mA	VR9 VR10	VR = VR9 - VR10	-12	12	mV
	VR I T	13	Vs = 30 V	IR = 1.0 mA	VR11	VR I T = (VR11 - VR5 ) I 140	-0.5	0.5	ppm I °C
	Is	14	Vs = 40 V	IR = 0 mA			6	40	mA
4 TA = +25°C	NO	15	Vs = 30 V	IR = 1.0 mA	VR12	NO = VR12	0	50	∝Vp-p
	NO	15	BW = 0.1 Hz to 10 Hz		VR12	NO = VR12	0	50	∝Vp-p
	IsI1 IsI2	16 17	Vs = 40 V Vs = 9 V	IR = 0 mA IR = 0 mA			---	200	mA
	VR 1I temp cycle	18 19 20	Vs = 30 V Vs = 30 V Vs = 30 V	IR = 1 mA IR = 1 mA IR = 1 mA	VR13 VR14 VR15	VR = VR13 - VR14 VR = VR14 - VR15	-10 -10	10 10	mV
5 TA = +25°C	VR I time	21	Vs = 30 V	IR = 1 mA	VR16	VR = VR16 - VR2	-20	20	ppm I 600 hrs

1I Following the measurement (VR13), the temperature TA shall be cycled to +125°C for 1 hour and returned to +25°C for measurement (VR14). Following the measurement (VR14), the temperature TA shall be cycled to -55°C for 1 hour and returned to +25°C for measurement (VR15).