MIL-M-38510/119B
1.3 Absolute maximum ratings.
Supply voltage range ....................................................................... ±18 V Input voltage range .......................................................................... ± 15 V 1/ Differential input voltage range ........................................................ ± 30 V
Storage temperature range .............................................................. -65°C to +150°C Output short-circuit duration ............................................................. Unlimited 2/ Lead temperature (soldering, 60 seconds) ...................................... +300°C
Junction temperature (TJ) ................................................................ +175°C 3/
1.4 Recommended operating conditions.
Supply voltage range ........................................................................ ±5 V to ±15 V dc
Ambient temperature range (TA) ...................................................... -55°C to +125°C
1.5 Power and thermal characteristics.
Package Case outline
Maximum allowable
Power dissipation
Maximum
eJC
Maximum
eJA
14-lead dual-in-line C 400 mW at TA = +125°C 35°C/W 120°C/W
14-lead flat pack D 350 mW at TA = +125°C 60°C/W 140°C/W
8-lead can G 330 mW at TA = +125°C 40°C/W 150°C/W
10-lead flat pack H 290 mW at TA = +125°C 70°C/W 170°C/W
8-lead dual-in-line P 400 mW at TA = +125°C 35°C/W 120°C/W
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications and standards form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-PRF-38535 - Integrated Circuits (Microcircuits) Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-883 - Test Method Standard for Microelectronics.
MIL-STD-1835 - Interface Standard Electronic Component Case Outlines.
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
1/ The absolute maximum negative input voltage is equal to the negative power supply voltage.
2/ Short circuit may be to ground or either supply. Rating applies to +125°C case temperature or +75°C
ambient temperature.
3/ For short term test (in the specific burn-in and steady-state life test configuration when required and up to 168 hours maximum), TJ = +275°C.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business