MIL-M-38510-104 Microcircuits, Linear, Line Drivers And Receivers, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon line drivers and receivers for use as voltage comparators and in balanced or unbalanced differential transmission systems which may include party-line transmission systems. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43

TABLE III. Group A inspection for device type 05 - Continued.

Terminal conditions (pins not designated are open)

Subgroup

Symbol

MIL-STD-

883 method

Cases

E and F

Measured terminal

Limits

Unit

Test no.

1ZP

1YP

GND

2YP

2ZP

vCC

Min

Max

21 31

Same tests and terminal conditions as subgroup 9 with TA = +125°C and the limits changed to: tPLH and tPHL now 30 ns maximum, tPZH now 25 ns maximum, tPHZ now 35 ns maximum, tPZL now 35 ns maximum, tPLZ now 45 ns maximum.

21 31

Same tests, terminal conditions, and limits as subgroup 10, except TA = -55°C.

11 Indicated inputs are connected together to a 1 kν resistor to 5.0 v dc.

21 For subgroups 9, 10, and 11, the unused output terminals may be open or loaded to facilitate equipment setup and minimize switching of loads as long as there is no effect on the

measured parameter.

31 For subgroups 9, 10, and 11, all the unused input terminals may be open or grounded at the supplier's option.