INCH-POUND MIL-M-38510/104C
18 September 2003
SUPERSEDING MIL-M-38510/104B
29 May 1987
MILITARY SPECIFICATION
MICROCIRCUITS, LINEAR, LINE DRIVERS AND RECEIVERS, MONOLITHIC SILICON
This specification is approved for use by all Departments and Agencies of the Department of Defense.
Reactivated for new design as of 18 September 2003. May be used for either new or existing design acquisition.
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic silicon line drivers and receivers for use as voltage comparators and in balanced or unbalanced differential transmission systems which may include party-line transmission systems. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)
1.2 Part number. The part number should be in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types should be as follows: Device type Circuit
01 Dual line receiver
02 Dual line receiver (open collector output)
03 Dual differential line driver (two-state output)
04 Dual differential line receiver
05 Dual differential line driver (three-state output with high-impedance off-state)
06 Dual differential line driver (three-state output with high-impedance off-state)
with output diode clamping
07 Dual differential line driver (three-state output with high-impedance off-state)
1.2.2 Device class. The device class should be the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outline. The case outline should be as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style
A 1/ GDFP5-F14 or CDFP6-F14 14 Flat pack
B 1/ GDFP4-F14 14 Flat pack
C GDIP1-T14 or CDIP2-T14 14 Dual-in-line
D GDFP1-F14 or CDFP2-F14 14 Flat pack
E GDIP1-T16 or CDIP2-T16 16 Dual-in-line
F GDFP2-F16 or CDFP3-F16 16 Flat pack
2 CQCC1-N20 20 Square leadless chip carrier
1/ Inactive package case outline.
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43216-5000, or email bipolar@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at www.dodssp.daps.mil.
AMSC N/A FSC 5962
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business