MIL-M-38510-314 Microcircuits, Digital, Low-Power Schottky, Ttl, Monostable Multivibrators, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, monostable multivibrator microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32

MIL-M-38510/314C

NOTES:

1. Pulse generator has the following characteristics: PRR s 1.0 MHz, tPIN � 40 ns, tTHL s 6 ns, tTLH s 15 ns, tSETUP1 (CLEAR INACTIVE) = 15 ns and ZOUT = 50n.

2. See table III notes for Rext, Cext values.

3. CL = 50 pF ±10% including scope probe, wiring and stray capacitance, without package in test fixture.

4. All diodes are 1N3064, or 1N916 or equivalent.

5. Load circuit on a given output is only required where the specified test in table III indicates "OUT" on that output.

6. tSETUP (max) shall be s 50% of the typical output pulse width for the actual Cext used (see figure 2).

FIGURE 4. Switching test circuit and waveforms for device type 02 - Continued.