MIL-M-38510/204F
TABLE IVA. Programming characteristics for circuit A.
Parameter |
Symbol |
Limits 1/ |
Unit |
||
Min |
Recommended |
Max |
|||
Address input voltage 2/ |
VIH |
2.4 |
5.0 |
5.0 |
V " |
|
VIL |
0.0 |
0.4 |
0.5 |
||
Programming |
VPH 3/ |
10.75 |
11.0 |
11.25 |
V |
Voltage to VCC low |
VPL |
0.0 |
0.0 |
1.5 |
V |
Program verify |
VPHV |
--- |
5.5 |
--- |
V |
Verify voltage |
VR 4/ |
4.5 |
--- |
5.5 |
V |
Programming input low current at VPH |
IILP |
--- |
-300 |
-600 |
µA |
Programmed voltage (VCC) transition time |
tTLH |
1 |
5 |
10 |
µs " |
tTHL |
1 |
5 |
10 |
||
Programming delay |
tD1 |
10 |
10 |
20 |
µs " |
tD2 |
1 |
5 |
5 |
||
Programming pulse width |
tP 5/ |
90 |
100 |
110 |
µs |
Programming duty cycle |
PDC |
--- |
30 |
60 |
% |
Output voltage Enable |
VOPE 6/ |
10.5 |
10.5 |
11.0 |
V |
Output voltage Disable |
VOPD 6/ |
0.0 |
5.0 |
5.5 |
V |
During the programming the chip must be disabled for proper operation.
1/ TC = +25°C.
2/ No inputs should be left open for VIH.
3/ VPH source must be capable of supplying one ampere.
4/ It is recommended that post programming dual verification be made at VR minimum and VR maximum.
5/ Note step j in programming procedure.
6/ VOPE source must be capable of supplying 10 mA minimum.
24
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business