MIL-M-38510-129 Microcircuits, Monolithic Silicon Interface, Dual, Peripheral DriversThis specification covers the detail requirements for bipolar, monolithic silicon, dual peripheral drivers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74 - 75 - 76 - 77 - 78 - 79 - 80 - 81

MIL-M-38510/1298

NOTES:

1. The output offset voltage shall be adjusted to zero volts with the device under test (OUT) removed.

The operational amplifier stabilization networks may vary with test adapter construction. Alternative drive circuits for the 2N6295 may be used to develop the proper forcing currents and

input voltage pulses. These circuits shall require the approval of the qualifying activity.

2. Relay switch positions are defined in table III.

3. Resistors R5, R6, R14 shall have a tolerance ≤ 0.1% for device types 01, 06.

4. Reference figure 4 for input and output waveforms for device types 01, 06.

FIGURE 3. Test circuit for static tests, device types 01 and 06.