MIL-M-38510-126 Microcircuits, Linear, Regulating, Pulse Width Modulator, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, pulse width modulator microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56

MIL-M-38510/126C

TABLE III.  Group A inspection - Continued.

NOTES:

12/  VN = 2.5 V.  Equation for CMR is as follows:

CMR = 20 Log [ 5.2 V (201) /  I ( EX - EY - 5.2) I ] Test number 19:  EX = E17, EY = E16

Test number 50:  EX = E40, EY = E39

Test number 81:  EX = E63, EY = E62

13/  VN = 0.5 V to 3.5 V.  Equation for AVS is as follows: AVS = 20 Log ( VN (201) / I EX I )

Test number 101:  EX = E73

Test number 118:  EX = E84

Test number 135:  EX = E95

14/  VN = 2.5 V.  Equation for PSRR is as follows: PSRR = 20 Log [ VIN (201) / I ( EX - EY ) I ]

Test number 102:  ( EX - EY ) = ( E75 - E74 )

Test number 119:  ( EX - EY ) = ( E86 - E85 ) Test number 136:  ( EX - EY ) = ( E97 - E96 )

15/  Increase voltage on +C.S. until V shutdown σ 0.4 V.  Record V  +C.S.

16/  See figure 4.

52