MIL-M-38510-126 Microcircuits, Linear, Regulating, Pulse Width Modulator, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, pulse width modulator microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56

INCH-POUND MIL-M-38510/126C

30 April 2004

SUPERSEDING MIL-M-38510/1268

30 December 1988

MILITARY SPECIFICATION

MICROCIRCUITS, LINEAR, REGULATING, PULSE WIDTH MODULATOR, MONOLITHIC SILICON Reactivated after 30 April 2004 and may be used for either new or existing design acquisition.

This specification is approved for use by all Departments and Agencies of the Department of Defense.

The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF-38535.

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon, pulse width modulator microcircuits.  Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number.  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

1.2  Part or Identifying Number (PIN).  The PIN is in accordance with MIL-PRF-38535, and as specified herein.

1.2.1  Device types.  The device types are as follows: Device type                                                   Circuit

01                                    Regulating, pulse width modulator

02                                    Regulating, pulse width modulator

03                                    Regulating, pulse width modulator

04                                    Regulating, pulse width modulator

1.2.2  Device class.  The device class is the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outlines.  The case outlines are as designated in MIL-STD-1835 and as follows:

Outline letter          Descriptive designator                  Terminals                    Package style

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-vAS, 3990 East 8road St., Columbus, OH 43216-5000, or email linear@dscc.dla.mil.  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at www.dodssp.daps.mil.

AMSC N/A                                                                                                                                           FSC 5962