MIL-M-38510-105 Microcircuits, Linear, Cmos, High Level Analog Switch With Driver, Monolithic SiliconThis specification covers the detail requirements for silicon, CMOS monolithic, analog switches. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.4.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39

MIL-M-38510/105A

NOTES:

1.  RL = 1 kn ±5%, CL = 95 pF minimum to 200 pF maximum.

2.  tD1, tD2, tD3, and tD4 shall be measured.  These measurements shall apply only to device types 03, 04, and 07.

See 3.5.1 for switch conditions.

3.  VSOURCE (VS) = +10 V for condition A (all device types).

VSOURCE (VS) = -10 V for condition B (all device types).

4.  VX = +8 V for condition A (all device types).

VX = -8 V for condition B (all device types).

5.  The logic driver shall have the following characteristics:

a.  VLOGIC = 0 V to 3 V for parts 01 through 08.

b.  Rise time (0.3 V to 2.7 V) ≤ 10 ns, for part types 01 through 08.

Fall time (2.7 V to 0.3 V) ≤ 10 ns, for part types 01 through 08.

FIGURE 12. Break-before-make test circuit.

20

For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business