MIL-M-38510/102C
TABLE III. Group A inspection - continued.
Subgroup |
Symbol |
Test No. |
Conditions 1/ 2/ |
Limits |
Units |
|
Min |
Max |
|||||
3 TA = -55°C |
VRLINE |
15 |
VOUT = 5 V, IL = 1 mA, VIN = 12 V to 15 V |
-0.3 |
0.3 |
% VOUT |
VRLOAD |
16 |
VOUT = 5 V, VIN = 12 V, IL = 1 mA to 50 mA |
-0.6 |
0.6 |
% VOUT |
|
VREF |
17 |
VIN = 12 V, IREF = 1 mA |
6.90 |
7.40 |
V dc |
|
ISCD |
18 |
VOUT = VREF, VIN = 30 V, IL = IREF = 0 |
0.5 |
3.5 |
mA |
|
4 TA = +25°C |
Ripple rej. |
19 |
f = 10 kHz, CREF = 0, see figure 3 |
64 |
dB |
|
Ripple rej. |
20 |
f = 10 kHz, CREF = 5 ∝F, see figure 3 |
76 |
dB |
||
Output noise |
21 |
BW = 100 Hz to 10 kHz, CREF = 0, see figure 3 |
120 |
∝V rms |
||
Output noise |
22 |
BW = 100 Hz to 10 kHz, CREF = 5 ∝F, see figure 3 |
7.0 |
∝V rms |
||
Line transient response |
23 |
VIN = 12 V, VOUT = 5 V, IL = 1 mA, CREF = 5 ∝F, RSC = 0 ν, VIN = 3 V, see figure 4 |
0 |
10 |
mV/V |
|
Load transient response |
24 |
VIN = 12 V, VOUT = 5 V, IL = 40 mA, CREF = 5 ∝F, RSC = 0 ν, IL = 10 mA, see figure 4 |
-1.5 |
0 |
mV/mA |
|
8A TA = +125°C |
TCVOUT |
25 |
VOUT = 5 V, VIN = 12 V, IL = 1 mA |
-0.010 |
0.010 |
%/°C |
8B TA = -55°C |
TCVOUT |
26 |
VOUT = 5 V, VIN = 12 V, IL = 1 mA |
-0.015 |
0.015 |
%/°C |
1/ All VOUT values are nominal.
2/ Unless otherwise specified, use figure 5.
3/ To eliminate heating, test must be made in less than 10 ms, duty cycle of less than 5 percent.
VOUT is the nominal output voltage prior to application of short circuit.
4/ The test time is less than 50 ms. For sustained operation, the maximum power dissipation must be taken into account.
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business