INCH-POUND MIL-M-38510/102C
02 September 2003
SUPERSEDING MIL-M-38510/102B
24 April 1987
MILITARY SPECIFICATION
MICROCIRCUITS, LINEAR, VOLTAGE REGULATOR, MONOLITHIC SILICON
This specification is approved for use by all Departments and Agencies of the Department of Defense. Reactivated for new design as of 02 September 2003. May be used for either new or existing design acquisition.
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic silicon, voltage regulator. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).
1.2 Part number. The complete part number should be in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types should be as shown in the following:
Device type Circuit
01 Precision voltage regulator
1.2.2 Device class. The device class should be the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outlines. The case outlines should be designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style
A |
1/ |
GDFP5-F14 or CDFP6-F14 |
14 |
Flat pack |
B |
1/ |
GDFP4-F14 |
14 |
Flat pack |
C |
GDIP1-T14 or CDIP2-T14 |
14 |
Dual-in-line |
|
D |
GDFP1-F14 or CDFP2-F14 |
14 |
Flat pack |
|
H |
GDFP1-F10 or CDFP2-F10 |
10 |
Flat pack |
|
I |
MACY1-X10 |
10 |
Can |
|
2 |
CQCC1-N20 |
20 |
Square leadless chip carrier |
1/ Inactive package case outline.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, P.O. Box 3990, Columbus, OH 43216-5000, using the self addresses Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A FSC 5962
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business