MIL-M-38510-102 Microcircuits, Linear, Voltage Regulator, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, voltage regulator. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23

MIL-M-38510/102C

TABLE I. Electrical performance characteristics - Continued.

Test	Symbol	Conditions 1/ 2/ -55°C = TA = +125°C unless otherwise specified	Group A subgroups	Device type	Limits		Unit
Test	Symbol		Group A subgroups	Device type	Min	Max	Unit
Line transient response	VOUT / VIN	VIN = 12 V, VOUT = 5 V, IL = 1 mA, RSC = 0 ν, VIN = 3 V for 25 ∝s, see figure 4, TA = +25°C	4	01	0	10	mV/V
Load transient response	VOUT / IL	VIN = 12 V, VOUT = 5 V, IL = 40 mA, RSC = 0 ν, IL = 10 mA for 25 ∝s, see figure 4, TA = +25°C	4	01	-1.5	0	mV/mA

1/ All VOUT values are nominal.

2/ All regulation requirements are based on a constant junction temperature.

3/ The test time is less than 50 ms. For sustained operation, the maximum power dissipation must be taken into account.

3.6 Rebonding. Rebonding shall be in accordance with MIL-PRF-38535.

3.7 Electrical test requirements. Electrical test requirements for each device class shall be the subgroups specified in table II. The electrical tests for each subgroup are described in table III.

3.8 Marking. Marking shall be in accordance with MIL-PRF-38535.

3.9 Microcircuit group assignment. The devices covered by this specification shall be in microcircuit group number 52 (see MIL-PRF-38535, appendix A).