MIL-M-38510-753 Microcircuits, Digital, Advanced Cmos, Flip-Flops, Monolithic Silicon, Positive LogicThis specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance RHA are provided and are reflected in the complete Part or Identifying Number PIN. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23

MIL-M-38510/753B

TABLE I. Electrical performance characteristics - Continued.

Test and MIL-STD-883 test method	Symbol	Test Conditions 1/ -55°C σ TC σ +125°C +3.0 V σ VCC σ +5.5 V unless otherwise specified		Device type 2/	VCC	Group A subgroups	Limits 1/		Unit
							Min	Max
Quiescent supply current, output high 3005	ICCH 4/ 5/	For all inputs, VIN = VCC or GND		01-05	5.5 V	1		1.0	∝A
				06-08				2.0
				All		2		40.0
			M	02, 04, 07		1		15.0
			D					75.0
			P, L, R					700.0
			F	02, 07				700.0
Quiescent supply current, output low 3005	ICCL 4/ 5/	For all inputs, VIN = VCC or GND		01-05	5.5 V	1		1.0	∝A
				06-08				2.0
				All		2		40.0
			M	02, 04, 07		1		15.0
			D					75.0
			P, L, R					700.0
			F	02, 07				700.0
High level ground bounce noise	VGBH 8/ 9/	VLD = 2.5 V IOH = -24 mA VIN = 4.5 V or 0.0 V See figure 3		01-05	4.5 V	4		1000	mV
				06-08				2000
Low level ground bounce noise	VGBL 8/ 9/	VLD = 2.5 V IOL = +24 mA VIN = 4.5 V or 0.0 V See figure 3		01-05	4.5 V	4		1000	mV
				06-08				2000
Latch-up input/ output over- voltage	ICC (O/V1) 10/	tw 100 ∝s tcool tw 5 ∝s σ tr σ 5 ms 5 ∝s σ tf σ 5 ms Vtest = 6.0 V VCCQ = 5.5 V Vover = 10.5 V		All	5.5 V	2		200	mA
Latch-up input/ output positive over-current	ICC (O/I1+) 10/	tw 100 ∝s tcool tw 5 ∝s σ tr σ 5 ms 5 ∝s σ tf σ 5 ms Vtest = 6.0 V VCCQ = 5.5 V Itrigger = +120 mA		All	5.5 V	2		200	mA
Latch-up input/ output negative over-current	ICC (O/I1-) 10/	tw 100 ∝s tcool tw 5 ∝s σ tr σ 5 ms 5 ∝s σ tf σ 5 ms Vtest = 6.0 V VCCQ = 5.5 V Itrigger = -120 mA		All	5.5 V	2		200	mA
Latch-up supply over-voltage	ICC (O/V2) 10/	tw 100 ∝s tcool tw 5 ∝s σ tr σ 5 ms 5 ∝s σ tf σ 5 ms Vtest = 6.0 V VCCQ = 5.5 V Vover = 9.0 V		All	5.5 V	2		100	mA

See footnotes at end of table.