Compliment Buffer, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance RHA are provided and are reflected in the complete Part or Identifying Number PIN. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41

MIL-M-38510/55G

1.4 Recommended operating conditions.

Supply voltage range (VCC or VDD - VSS):

Device types 01, 02, 03, 04, and 05..................................... 4.5 V dc to 12.5 V dc

Device types 51, 52, 53, 54, and 55..................................... 4.5 V dc to 15.0 V dc

Input low voltage range (VIL):

Device types 01, 02, 03, 04, and 05..................................... 0.0 V to 0.85 V dc @ VCC or VDD = 5.0 V dc

0.0 V to 2.1 V dc @ VCC or VDD = 12.5 V dc

Device types 51, 52, 53, 54, and 55..................................... VOL = 10% VCC or VDD, VOH = 90% VCC or VDD

0.0 V to 1.5 V dc @ VCC or VDD = 5.0 V dc

0.0 V to 2.0 V dc @ VCC or VDD = 10.0 V dc

0.0 V to 4.0 V dc @ VCC or VDD = 15.0 V dc

Input high voltage range (VIH): 1/

Device types 01, 02, 03, 04, and 05..................................... 3.95 V to 5.0 V dc @ VCC or VDD = 5.0 V dc

10 V to 12.5 V dc @ VCC or VDD = 12.5 V dc

Device types 51, 52, 53, 54, and 55..................................... VOL = 10% VCC or VDD, VOH = 90% VCC or VDD

3.5 V to 5.0 V dc @ VCC or VDD = 5.0 V dc

8.0 V to 10.0 V dc @ VCC or VDD = 10.0 V dc

11.0 V to 15.0 V dc @ VCC or VDD = 15.0 V dc

Load capacitance ................................................................... 50 pF maximum

Case operating temperature range (TC) ................................ -55°C to +125°C

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications and Standards. The following specifications and standards form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATION

MIL-PRF-38535 - Integrated Circuits (Microcircuits) Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-883 - Test Method Standard Microcircuits.

MIL-STD-1835 - Interface Standard Electronic Component Case Outlines.

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or https://assist.daps.dla.mil/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

1/ The input high voltage (VIH) can exceed the power supply voltage (VCC) up to the maximum rating when device types 03, 04, 53, and 54 are used for logic level conversion.