MIL-M-38510-380 Microcircuits, Digital, Bipolar, Advanced Low Power Schottky Ttl, Binary Counters, Cascadable, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, advanced low power Schottky TTL, binary counters. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64

TA8LE III.  Group A inspection for device type 03.

Terminal conditions (pins not designated may be high � 2.0 V; low s 0.8 V; or open).

1/  For cases X and 2, pins not referenced are NC.

- - - - 2.5 V min/ 5.5 V max

2/  Apply one clock pulse prior to test as follows:                               0 V

3/  IIL  limits shall be as follows:

4/  Method 3011 shall be used, except the output voltage shall be as specified herein, and the output current shall be  operating rather than short circuit current.  The output conditions have been chosen to produce a current that closely approximates one-half of the true short circuit output current IOS.

5/  Only a summary of attributes data is required.

6/  A = 3.0 V minimum, 8 = 0.0 V or GND.

7/  H > 1.5 V; L < 1.5 V.

8/  The fMAX  minimum limit specified is the frequency of the input pulse.  The output frequency shall be one-half of the input frequency.