MIL-M-38510-372 Microcircuits, Digital, Bipolar, Advanced Low Power Schottky Ttl, Flip-Flops Cascadable, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, advanced low power Schottky TTL, flip-flops, bistable logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37

TABLE III.  Group A inspection for device type 02 - Continued.

Terminal conditions (pins not designated may be high � 2.0 V; low s 0.8 V; or open).

1/  Terminals not referenced are N/C.

2/  Apply                         2.0 V min/4.5 V max       (pulse, prior to test).

-- 0 V

3/  IIL  limits shall be as follows:

4/  Method 3011 of MIL-STD-883 shall be used, except the output shall be as specified herein, and the output current shall be operating rather than short circuit current.

The output conditions have been chosen to produce a current that closely approximates one half of the true short circuit output current, IOS.

5/  Tests shall be performed in sequence, attributes data only.

6/  A = 2.4 V minimum, B = 0.4 V.

7/  H > 1.5 V, L < 1.5 V.

8/  fMAX minimum limit specified is the frequency of the input pulse.  The output frequency shall be one-half of the input frequency.