TABLE III. Group A inspection for device type 06 - Continued.
Terminal conditions (pins not designated may be high � 2.0 V; low s 0.8 V; or open).
Subgroup |
Symbol |
MIL-STD- 883 method |
Cases A,B,C,D |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
Measured terminal |
Limits |
Unit |
||||||
Case 1/ 2 |
2 |
3 |
4 |
6 |
8 |
9 |
10 |
12 |
13 |
14 |
16 |
18 |
19 |
20 |
||||||||||||
Test no. |
1A |
1Y |
2A |
2Y |
3A |
3Y |
GND |
4Y |
4A |
5Y |
5A |
6Y |
6A |
VCC |
Min |
Max |
||||||||||
2 |
Same tests, terminal conditions and limits as for subgroup 1, except TC = +125°C and VIC tests are omitted. |
|||||||||||||||||||||||||
3 |
Same tests, terminal conditions and limits as for subgroup 1, except TC = -55°C and VIC tests are omitted. |
|||||||||||||||||||||||||
9 Tc = 25°C |
tPHL |
3003 Fig. 3 " " " " |
45 |
IN |
OUT |
2.7 V |
2.7 V |
GND |
2.7 V |
2.7 V |
2.7 V |
5.0 V |
1A to 1Y |
2 |
9 |
ns |
||||||||||
46 |
2.7 V |
IN |
OUT |
2.7 V |
" |
" |
" |
" |
" |
2A to 2Y |
" |
" |
" |
|||||||||||||
47 |
" |
2.7 V |
IN |
OUT |
" |
" |
" |
" |
" |
3A to 3Y |
" |
" |
" |
|||||||||||||
48 |
" |
" |
2.7 V |
" |
OUT |
IN |
" |
" |
" |
4A to 4Y |
" |
" |
" |
|||||||||||||
49 |
" |
" |
" |
" |
2.7 V |
OUT |
IN |
" |
" |
5A to 5Y |
" |
" |
" |
|||||||||||||
50 |
" |
" |
" |
" |
" |
2.7 V |
OUT |
IN |
" |
6A to 6Y |
" |
" |
" |
|||||||||||||
tPLH |
" " " " " " |
51 |
IN |
OUT |
" |
" |
" |
" |
" |
2.7 V |
" |
1A to 1Y |
3 |
11 |
" |
|||||||||||
52 |
2.7 V |
IN |
OUT |
" |
" |
" |
" |
" |
" |
2A to 2Y |
" |
" |
" |
|||||||||||||
53 |
" |
2.7 V |
IN |
OUT |
" |
" |
" |
" |
" |
3A to 3Y |
" |
" |
" |
|||||||||||||
54 |
" |
" |
2.7 V |
" |
OUT |
IN |
" |
" |
" |
4A to 4Y |
" |
" |
" |
|||||||||||||
55 |
" |
" |
" |
" |
2.7 V |
OUT |
IN |
" |
" |
5A to 5Y |
" |
" |
" |
|||||||||||||
56 |
" |
" |
" |
" |
" |
2.7 V |
OUT |
IN |
" |
6A to 6Y |
" |
" |
" |
|||||||||||||
10 |
tPHL |
Same tests and terminal conditions as subgroup 9, except TC = +125°C. |
2 |
12 |
" |
|||||||||||||||||||||
tPLH |
3 |
17 |
" |
|||||||||||||||||||||||
11 |
Same tests, terminal conditions and limits as for subgroup 10, except TC = -55°C. |
|||||||||||||||||||||||||
1/ For case 2, pins not referenced are N/C.
2/ IIL limits shall be as follows:
Parameters |
Min/Max limits in µA for circuit |
||
A |
B |
C |
|
IIL |
0/-100 |
0/-100 |
-0.2/-400 |
3/ Method 3011 of MIL-STD-883 shall be used, except the output shall be as specified herein, and the output current shall be operating rather than short circuit current.
The output conditions have been chosen to produce a current that closely approximates one half of the true short circuit output current, IOS.
4/ IO limits shall be -30 to -112 mA for circuit A and -30 to -110 mA and for circuit C.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business