MIL-M-38510-316 Microcircuits, Digital, Bipolar, Low-Power Schottky Ttl, Cascadable Latches,Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, latches. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36

MIL-M-38510/316E

2.  APPLICABLE DOCUMENTS

2.1  Government documents.

2.1.1  Specifications and Standards.  The following specifications and standards form a part of this specification to the extent specified herein.  Unless otherwise specified, the issues of these documents shall be those listed in the issue of the Departments of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation.

SPECIFICATION

DEPARTMENT OF DEFENSE

MIL-PRF-38535   -        Integrated Circuits (Microcircuits) Manufacturing, General Specification for. STANDARDS

DEPARTMENT OF DEFENSE

MIL-STD-883       -        Test Method Standard for Microelectronics.

MIL-STD-1835     -        Interface Standard Electronic Component Case Outlines

(Unless otherwise indicated, copies of the above specifications and standards are available from the Standardization

Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA  19111-5094.)

2.2  Order of precedence.  In the event of a conflict between the text of this specification and the references cited herein, the text of this document takes precedence.  Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

3.  REQUIREMENTS

3.1  Qualification.  Microcircuits furnished under this specification shall be products that are manufactured by a manufacturer authorized by the qualifying activity for listing on the applicable qualified manufacturers list before contract award (see 4.3 and 6.4).

3.2  Item requirements.  The individual item requirements shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturer's Quality Management (QM) plan.  The modification in the QM plan shall not affect the form, fit, or function as described herein.

3.3  Design, construction, and physical dimensions.  The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein.

3.3.1  Terminal connections.  The terminal connections shall be as specified on figure 1.

3.3.2  Truth table.  The truth table shall be as specified on figure 2.

3.3.3  Schematic circuits.  The schematic circuits shall be maintained by the manufacturer and made available to the qualifying activity and the preparing activity upon request.

3.3.4  Case outlines.  The case outlines shall be as specified in 1.2.3.

3