MIL-M-38510/17B
1.3 Absolute maximum ratings.
Supply voltage range ...................................................... -0.5 V dc to +7.0 V dc
Input voltage range ......................................................... -1.5 V dc at -12 mA to +5.5 V dc
Storage temperature range ............................................ -65°C to +150°C Maximum power dissipation per flip-flop, (PD) 1/
Device type 01 ........................................................ 73 mW Device type 02 ........................................................ 65 mW
Lead temperature (soldering 10 seconds) ...................... 300°C
Thermal resistance, junction-to-case (eJC)...................... (See MIL-STD-1835) Junction temperature (TJ ) 2/.......................................... 175°C
1.4 Recommended operating conditions.
Supply voltage ................................................................ 4.5 V dc minimum to 5.5 V dc maximum
Minimum high level input voltage ................................... 2.0 V dc Maximum low level input voltage .................................... 0.8 V dc Normalized fanout (each output) 3/ ................................ 10 maximum Case operating temperature range (TC ) ......................... -55°C to 125°C Input setup time
Data input ................................................................ 25 ns
Clear inactive state .................................................. 30 ns
Input hold time ................................................................ 5 ns
2.0 APPLICABLE DOCUMENT
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications and standards. The following specifications and standards form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-PRF-38535 - Integrated Circuits (Microcircuits) Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-883 - Test Method Standard for Microelectronics.
MIL-STD-1835 - Interface Standard Electronic Component Case Outlines
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
1/ Must withstand the added PD due to short circuit condition (e.g. IOS).
2/ Maximum junction temperature should not be exceeded except in accordance with allowable short
duration burn-in screening condition in accordance with MIL-PRF-38535.
3/ Device will fanout in both high and low levels to the specified number of inputs of the same device type as that being tested.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business