MIL-M-38510-17 Microcircuits, Digital, Ttl, Flip-Flops, Monolithic SiliconThis specification covers the detail requirements for monolithic, silicon, TTL, bistable logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.4.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22

INCH POUND

MIL-M-38510/178

3 May 2005_ SUPERSEDING

MIL-M-38510/17A(USAF)

1 May 1979

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, TTL, FLIP-FLOPS, MONOLITHIC SILICON

Inactive for new design after 7 September 1995.

This specification is approved for use by all Depart- ments  and  Agencies  of the  Department of  Defense.

The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic, silicon, TTL, bistable logic gating microcircuits.  Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number.  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

1.2  Part or Identifying Number (PIN).  The PIN is in accordance with MIL-PRF-38535, and as specified herein.

1.2.1  Device types.  The device types are as follows:

Device type                                                   Circuit

01        Hex, D-type, positive edge triggered flip-flops with clear and single outputs

02        Quad, D-type, positive edge triggered flip-flops with clear and complementary outputs

1.2.2  Device class.  The device class is the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outlines.  The case outlines are as designated in MIL-STD-1835 and as follows:

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, P. O. 8ox 3990, Columbus, OH 43218-3990, or emailed to bipolar@dscc.dla.mil.  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.

AMSC N/A                                                                                                                                           FSC 5962