MIL-M-38510-116 Microcircuits, Linear, Cmos Analog Switch With Driver, Monolithic SiliconThis specification covers the detail requirements for silicon, CMOS, monolithic, analog switches with drivers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58

MIL-M-38510/116A

NOTES:

1.  RL  = 1 kν ±5%, CL  = 100 pF ±5%.

2.  TD1, TD2, TD3, and TD4  shall be measured.  These measurements shall apply only to device types 02, 04, 06, and

08.  See 3.5.1 for switch conditions.

3.  VSOURCE (VS) = +10 V for condition A (all part types).

VSOURCE (VS) = -10 V for condition B (all part types).

4.  VX = +9 V for condition A (all part types).

VX = -9 V for condition B (all part types).

5.  The logic driver shall have the following characteristics:

a.  VLOGIC  = 0 V to +4 V for parts 01-04.

VLOGIC  = 0 V to +15 V for parts 05-08.

b.  Rise time (0.4 V to 3.6 V) ≤ 20 ns, for part types 01-04

Fall time (3.6 V to 0.4 V) ≤ 20 ns, for part types 01-04

Rise time (1.5 V to 13.5 V) ≤ 20 ns, for part types 05-08

Fall time (13.5 V to 1.5 V) ≤ 20 ns, for part types 05-08

FIGURE 14. Break-before-make test circuit.

22

For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business