MIL-M-38510-116 Microcircuits, Linear, Cmos Analog Switch With Driver, Monolithic SiliconThis specification covers the detail requirements for silicon, CMOS, monolithic, analog switches with drivers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58

INCH-POUND MIL-M-38510/116A

4 February 2004

SUPERSEDING MIL-M-38510/116

16 April 1980

MILITARY SPECIFICATION

MICROCIRCUITS, LINEAR, CMOS, ANALOG SWITCH WITH DRIVER, MONOLITHIC SILICON This specification is approved for use by all Departments and Agencies of the Department of Defense.

Reactivated for new design as of  4 February 2004.  May be used for either new or existing design acquisition.

The requirement for acquiring the product herein shall consist of this specification sheet and MIL-PRF-38535.

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for silicon, CMOS, monolithic, analog switches with drivers.  Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number.  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

1.2  Part  or Identifying Number (PIN).  The PIN is in accordance with MIL-PRF-38535, and as specified herein.

1.2.1  Device types.  The device types are as follows: Device type                                                   Circuit

01                                    Two-channel, SPST switch, TTL input compatible

02                                    One-channel, SPDT switch, TTL input compatible

03                                    Two-channel, DPST switches, TTL input compatible

04                                    Two-channel, SPDT switch, TTL input compatible

05                                    Two-channel, SPST switch, CMOS input compatible

06                                    One-channel, SPDT switch, CMOS input compatible

07                                    Two-channel, DPST switch, CMOS input compatible

08                                    Two-channel, SPDT switches, CMOS input compatible

NOTE:  A channel is defined as a driver with associated switches.

1.2.2  Device class.  The device class is the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outline.  The case outlines are as designated in MIL-STD-1835 and as follows: Outline letter          Descriptive designator                  Terminals                    Package style

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43216-5000, or email bipolar@dscc.dla.mil.  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at www.dodssp.daps.mil.

AMSC N/A                                                                                                                                           FSC 5962