MIL-M-38510-116 Microcircuits, Linear, Cmos Analog Switch With Driver, Monolithic SiliconThis specification covers the detail requirements for silicon, CMOS, monolithic, analog switches with drivers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58

MIL-M-38510/116A

3.  REQUIREMENTS

3.1  Qualification.  Microcircuits furnished under this specification shall be products that are manufactured by a manufacturer authorized by the qualifying activity for listing on the applicable qualified manufacturers list before contract award (see 4.3 and 6.4).

3.2  Item requirements.  The individual item requirements shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturer's Quality Management (QM) plan.  The modification in the QM plan shall not affect the form, fit, or function as described herein.

3.3  Design, construction, and physical dimensions.  The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein.

3.3.1  Circuit diagram and terminal connections.  The circuit diagram and terminal connections shall be as specified on figure 3.

3.3.2  Schematic circuits.  The schematic circuits shall be maintained by the manufacturer and made available to the qualifying activity and the preparing activity upon request.

3.3.4  Case outlines.  The case outlines shall be as specified in 1.2.3.

3.4  Lead material and finish.  The lead material and finish shall be in accordance with MIL-PRF-38535 (see 6.6).

3.5  Electrical performance characteristics.  The electrical performance characteristics are as specified in table I, and apply over the full recommended ambient operating temperature range, unless otherwise specified.

3.5.1 Switch operation.  The analog switches are guaranteed to turn "on" with either a "low" input (VIL  ≤ 0.8 V for the 01 -04 devices and VIL  ≤ 3.5 V for the 05 -08 devices) or "high" input (VIH  4 V for the 01 - 04 devices and

VIH  11 V for the 05 - 08 devices) as specified below.

Device type         VIN                    Switch ON                   Switch OFF

3.6  Electrical test requirements.  Electrical test requirements for each device class shall be the subgroups specified in table II.  The electrical tests for each subgroup are described in table III.

3.7  Marking.  Marking shall be in accordance with MIL-PRF-38535.

3.8  Microcircuit group assignment.  The devices covered by this specification shall be in microcircuit group number

82 (see MIL-PRF-38535, appendix A).

3