INCH-POUND MIL-M-38510/1098
28 May 2004
SUPERSEDING MIL-M-38510/109A
18 September 1980
MILITARY SPECIFICATION
MICROCIRCUITS, LINEAR, PRECISION TIMERS, MONOLITHIC SILICON Reactivated after 28 May 2004 and may be used for either new or existing design acquisitions.
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF-38535.
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic silicon, precision timers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)
1.2 Part or identifying number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types are internally compensated and are as follows: Device type Circuit
01 1/ Precision timer
02 Precision timer, dual
03 Precision timer ( ISOURCE = -60 mA )
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outline. The case outlines are as designated in MIL-STD-1835 and as follows:
Outline letter Descriptive designator Terminals Package style
C |
GDIP1-T14 or CDIP2-T14 |
14 |
Dual-in-line |
G |
MACY1-X8 |
8 |
Can |
P |
GDIP1-T8 or CDIP2-T8 |
8 |
Dual-in-line |
2 |
CQCC1-N20 |
20 |
Square leadless chip carrier |
1/ Warning: Device type 01 in the glass frit sealed C and P packages does not pass the requirement of glassivation layer integrity test, MIL-STD-883, test method 2021, as specified in MIL-PRF-38535. Therefore, the glassivation layer integrity test is waived for device type 01 in the glass frit sealed C and P packages only. Operation of the 01 device in these packages types in the high level output voltage mode, may result in device reliability problems.
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East 8road St., Columbus, OH 43216-5000, or emailed to linear@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at www.dodssp.daps.mil.
AMSC N/A FSC 5962
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business