MIL-M-38510-754 Microcircuits, Digital, Advanced Cmos, Latches, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance RHA are provided and are reflected in the complete Part or Identifying Number PIN. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24

INCH-POUND

MIL-M-38510/7548

8 March 2005

SUPERSEDING MIL-M-38510/754A

29 June 1992

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, ADVANCED CMOS, LATCHES, MONOLITHIC SILICON

Reactivated after 8 March 2005 and may be used for new and existing designs and acquisitions

This specification is approved for use by all Departments and Agencies  of the  Department of  Defense.

The requirements for acquiring the product herein consists of this specification sheet and MIL-PRF 38535

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN).  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

1.2   Part or identifying number (PIN).  The PIN is in accordance with MIL-PRF-38535 and as specified herein.

1.2.1  Device types.  The device types are as follows:

Device type                                                     Circuit

01                                               To be included at a later date

02                                               To be included at a later date

03                                               Octal transparent latch with three-state outputs

04                                               Octal transparent latch with inverted three-state outputs

05                                               Octal D-type latch with inverted three-state outputs

06                                               Octal D-type latch with three-state outputs

1.2.2  Device class.  The device class is the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outlines.  The case outlines are as designated in MIL-STD-1835 and as follows:

Outline letter                 Descriptive designator                      Terminals                      Package style

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAC, P.O. 8ox 3990, Columbus, OH 43218-3990, or email CMOS@dscc.dla.mil.  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil

AMSC N/A                                                                                                                                       FSC 5962