MIL-M-38510-652 Microcircuits, Digital, High-Speed Cmos, And Gates, Or Gates, Monolithic Silicon, Positive LogicThis specification covers the detail requirements for monolithic silicon, high speed CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete Part or Identifying Number PIN. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24

MIL-M-38510/652B

TABLE I. Electrical performance characteristics - Continued.

Test	Symbol	Conditions 1/ -55°C ≤ TC ≤ +125°C unless otherwise specified	Device type	VCC	Limits		Unit
Test	Symbol		Device type	VCC	Min	Max	Unit
Quiescent supply current	ICCL	VIN = 0.0 V	All	6.0 V		10.0	µA
Quiescent supply current	ICCH	VIN = 6.0 V	All	6.0 V		10.0	µA
Input capacitance	CIN	TC = +25°C	All			10	pF
Power dissipation capacitance	CPD 2/ 3/	TC = +25°C	01			50	pF
			02			35
			03			38
			04			35
Propagation delay times	tPHL1, tPLH1 4/ 5/	CL = 50 pF ± 10%	01	4.5 V	3	23	ns
			03	4.5 V	4	28	ns
			04	4.5 V	5	29	ns
Propagation delay time, high-to-low level (other input low)	tPHL1 4/ 5/		02	4.5 V	3	28	ns
Propagation delay time, high-to-low level (other input high)	tPHL2 4/ 5/		02	4.5 V	3	28	ns
Propagation delay time, low-to-high level (other input low)	tPLH1 4/ 5/		02	4.5 V	3	28	ns
Propagation delay time, low-to-high level (other input high)	tPLH2 4/ 5/		02	4.5 V	3	28	ns
Transition times	tTHL, tTLH 4/ 5/		01	4.5 V	3	20	ns
			02	4.5 V	3	20	ns
			03	4.5 V	3	20	ns
			04	4.5 V	3	20	ns

1/ Complete terminal conditions shall be as specified in table III.

2/ Guaranteed but not tested.

3/ Power dissipation capacitance (CPD) per gate.

4/ Tested at VCC = 4.5 V at 125°C for sample testing and VCC = 4.5 V at 25°C for screening.

Guaranteed at other VCC voltages and temperatures. See table IA and exception in 4.4.1d.

5/ For propagation and transition delay times at VCC = 2.0 V, increase limit by a factor of 5.0.

For propagation and transition delay times at VCC = 6.0 V, decrease limit by a factor of 0.85.

TABLE IA. Calculated dynamic figures at TC = -55°C/+25°C.

VCC

+125°C

-55°C or +25°C

2.0V

4.5V

6.0V

1 →

↓

0.85

5 x 0.75

→ 0.75

↓

0.85 x 0.75

Normalized numbers

(125°C equals 1)

NOTE: The 2.0 V and 6.0 V numbers are derived from their 4.5 V integer value.

Rounding off according 5/4.