MIL-M-38510-60 Microcircuits, Digital, Ecl, Multiple Nor Gates, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, ECL, logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39

MIL-M-38510/608

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-883       -        Test Method Standard for Microelectronics.

MIL-STD-1835     -        Interface Standard Electronic Component Case Outlines

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, 8uilding 4D, Philadelphia, PA  19111-5094.)

2.3  Order of precedence.  In the event of a conflict between the text of this specification and the references cited herein, the text of this document takes precedence.  Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

3.  REQUIREMENTS

3.1  Qualification.  Microcircuits furnished under this specification shall be products that are manufactured by a manufacturer authorized by the qualifying activity for listing on the applicable qualified manufacturers list before contract award (see 4.3 and 6.4).

3.2  Item requirements.  The individual item requirements shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturer's Quality Management (QM) plan.  The modification in the QM plan shall not affect the form, fit, or function as described herein.

3.3  Design, construction, and physical dimensions.  The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein.

3.3.1  Terminal connections and logic diagrams.  The terminal connections and logic diagrams shall be as specified on figure 1.

3.3.2  Truth tables and logic equations.  The truth tables and logic equations shall be as specified on figure 2.

3.3.3  Schematic circuits.  The schematic circuits shall be maintained by the manufacturer and made available to the qualifying activity and the preparing activity upon request.

3.3.4  Case outlines.  Case outlines shall be in accordance with 1.2.3.

3.4  Lead material and finish.  Lead material and finish shall be in accordance with MIL-PRF-38535 (see 6.6).

3.5  Electrical performance characteristics.  The electrical performance characteristics are as specified and table I and apply over the full recommended case operating range unless otherwise specified.

3

Source:  https://assist.dla.mil  --  Downloaded: 

Check  the  source  to  verify  that  this  is  the  current  version  before  use.