MIL-M-38510-60 Microcircuits, Digital, Ecl, Multiple Nor Gates, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, ECL, logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39

MIL-M-38510/608

1.3 Absolute maximum ratings.

Supply voltage range ............................................................................. 0 V dc to -7.0 V dc Input voltage range 0 V dc to -5.2 V dc Storage temperature range .................................................................... -65° to +150°C Maximum power dissipation, (PD) 1/ ...................................................... 55 mW

Lead temperature (soldering, 10 seconds) ............................................. +260°C Junction temperature (TJ) 2/ ................................................................... 165°C Maximum output current ........................................................................ -50 mA Thermal resistance, junction to case (eJC):

Cases E, F, and 2 ............................................................................... (See MIL-STD-1835)

1.4 Recommended operating conditions.

Supply voltage (VEE) ...................................................................... -5.46 V minimum to -4.94 V maximum

Minimum high level input voltage ................................................... -1.105 V at TC = 25°C (at 500 linear feet per minute) (ft/min)........................................ -1.000 V at TC = 125°C

................................................................................................. -1.255 V at TC = -55°C Maximum low level input voltage ................................................... -1.475 V at TC = 25°C

(at 500 linear ft/min) ................................................................... -1.400 V at TC = 125°C

................................................................................................. -1.510 V at TC = -55°C

Normalized fanout (each output) ..................................................10 31

Operating temperature range (TC).................................................. -55° to +125°C (at 500 linear ft/min)

2. APPLICA8LE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of

this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications and Standards. The following specifications and standards form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-PRF-38535 - Integrated Circuits (Microcircuits) Manufacturing, General Specification for.

1/ Must withstand the added PD due to short-circuit test (e.g., IOS).

2/ Maximum junction temperature should not be exceeded except in accordance with allowable short

duration burn-in screening condition in accordance with MIL-PRF-38535.

3/ Device will fanout in both high and low levels to the specified number of data inputs on the same device type as that being tested.

Source: https://assist.dla.mil -- Downloaded:

Check the source to verify that this is the current version before use.