MIL-M-38510-350 Microcircuits, Digital, Bipolar, Advanced Schottky Ttl, Quad 2-Port Registers, Cascadable, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, advanced Schottky TTL, quad 2-port register microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23

TABLE III.  Group A inspection for device type 01.

Terminal conditions (pins not designated may be high � 2.0 V; low s 0.8 V; or open).

1/  Apply all voltages, then apply 3.0 V, 0.0 V, 3.0 V to CP then make measurement.

2/  Perform function sequence at VCC  = 4.5 V and repeat at VCC  = 5.5 V.

3/  A = 3.0 V, B = 0.0 V or GND;  H > 1.5 V, L < 1.5 V.

4/  IIL  limits (mA) min/max values for circuit shown:

5/  fMAX shall be measured only under the conditions of initial qualification and after process or design changes which may affect this parameter.

For all other conditions, fMAX  shall be guaranteed, if not tested, to the imits specified in table III, herein.