MIL-M-38510-350 Microcircuits, Digital, Bipolar, Advanced Schottky Ttl, Quad 2-Port Registers, Cascadable, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, advanced Schottky TTL, quad 2-port register microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23

MIL-M-38510/350A

2.2  Government documents.

2.2.1  Specifications and Standards.  The following specifications and standards form a part of this specification to the extent specified herein.  Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-PRF-38535   -        Integrated Circuits (Microcircuits) Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-883       -        Test Method Standard for Microelectronics.

MIL-STD-1835     -        Interface Standard Electronic Component Case Outlines

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or www.dodssp.daps.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA  19111-

5094.)

2.3  Order of precedence.  In the event of a conflict between the text of this specification and the references cited herein, the text of this document takes precedence.  Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

3.  REQUIREMENTS

3.1  Qualification.  Microcircuits furnished under this specification shall be products that are manufactured by a manufacturer authorized by the qualifying activity for listing on the applicable qualified manufacturers list before contract award (see 4.3 and 6.4).

3.2  Item requirements.  The individual item requirements shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturer's Quality Management (QM) plan.  The modification in the QM plan shall not affect the form, fit, or function as described herein.

3.3  Design, construction, and physical dimensions.  The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein.

3.3.1  Terminal connections.  The terminal connections shall be as specified on figure 1.

3.3.2  Truth tables.  The truth tables shall be as specified on figure 2.

3.3.3  Logic diagrams.  The logic diagrams shall be as specified on figure 3.

3.3.4  Schematic circuits.  The schematic circuits shall be maintained by the manufacturer and made available to the qualifying activity and the preparing activity upon request.

3.3.3  Case outlines.  The case outlines shall be as specified in 1.2.3.

3