MIL-M-38510-322 Microcircuits, Digital, Bipolar, Low-Power Schottky Ttl, Hex Bus Drivers With 3 State Outputs, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, hex bus driver 3 state microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28

MIL-M-38510/322C

3.  REQUIREMENTS

3.1  Qualification.  Microcircuits furnished under this specification shall be products that are manufactured by a manufacturer authorized by the qualifying activity for listing on the applicable qualified manufacturers list before contract award (see 4.3 and 6.4).

3.2  Item requirements.  The individual item requirements shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturer's Quality Management (QM) plan.  The modification in the QM plan shall not affect the form, fit, or function as described herein.

3.3  Design, construction, and physical dimensions.  The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein.

3.3.1  Terminal connections and logic diagrams.  The terminal connections and logic diagrams shall be as specified on figure 1.

3.3.2  Truth table.  The truth table shall be as specified on figure 2.

3.3.3  Schematic circuits.  The schematic circuits shall be maintained by the manufacturer and made available to the qualifying activity and the preparing activity upon request.

3.3.4  Case outlines.  The case outlines shall be as specified in 1.2.3.

3.4  Lead material and finish.  The lead material and finish shall be in accordance with MIL-PRF-38535 (see 6.6).

3.5  Electrical performance characteristics.  The electrical performance characteristics are as specified in table I, and apply over the full recommended case operating temperature range, unless otherwise specified.

3.6  Electrical test requirements.  The electrical test requirements for each device class shall be the subgroups specified in table II.  The electrical tests for each subgroup are described in table III.

3.7  Marking.  Marking shall be in accordance with MIL-PRF-38535.

3.8  Microcircuit group assignment.  The devices covered by this specification shall be in microcircuit group number 9 (see MIL-PRF-38535, appendix A).

3