MIL-M-38510-322 Microcircuits, Digital, Bipolar, Low-Power Schottky Ttl, Hex Bus Drivers With 3 State Outputs, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, hex bus driver 3 state microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28

INCH-POUND

MIL-M-38510/322C

14 July 2003        _ SUPERSEDING

MIL-M-38510/322B

20 October 1982

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, BIPOLAR, LOW-POWER SCHOTTKY TTL, HEX BUS DRIVERS WITH 3 STATE OUTPUTS, MONOLITHIC SILICON

Inactive for new design after 18 April 1997.

This specification is approved for use by all Departments and  Agencies  of the  Department of  Defense.

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, hex bus driver (3 state) microcircuits.  Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number.  For this product, the requirements of MIL-M-

38510 have been superseded by MIL-PRF-38535, (see 6.3).

1.2  Part number.  The part number should be in accordance with MIL-PRF-38535, and as specified herein.

1.2.1  Device types.  The device types should be as follows: Device type                                                   Circuit

01                                                        Hex bus driver, gated enable inputs for x-y coincident bus control

02        Hex inverter bus driver, gated enable inputs for x-y coincident bus control

03                                                        Hex bus driver, 4-line and 2-line enable inputs

04                                                        Hex inverter bus driver, 4-line and 2-line enable inputs

1.2.2  Device class.  The device class should be the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outlines.  The case outlines should be as designated in MIL-STD-1835 and as follows: Outline letter              Descriptive designator                    Terminals              Package style

Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, P. O. Box 3990, Columbus, OH 43216-5000, by using the self addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.

AMSC N/A                                                                                                                                             FSC 5962

DISTRIBUTION STATEMENT A.  Approved for public release; distribution is unlimited.