MIL-M-38510-302 Microcircuits, Digital, Bipolar Low-Power Schottky Ttl, Buffers, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, positive buffer microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23

INCH-POUND

MIL-M-38510/302D

10 January 2003

SUPERSEDING MIL-M-38510/302C

9 August 1983

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, BIPOLAR LOW-POWER SCHOTTKY TTL, BUFFERS, MONOLITHIC SILICON

Inactive for new design after 18 April 1997.

This specification is approved for use by all Departments and  Agencies  of the  Department of  Defense.

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, positive buffer microcircuits.  Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number.  For this product, the requirements of MIL-M-

38510 have been superseded by MIL-PRF-38535, (see 6.3).

1.2  Part number.  The part number shall be in accordance with MIL-PRF-38535, and as specified herein.

1.2.1  Device types.  The device types shall be as follows: Device type                                                   Circuit

01                                       Dual, 4-input, positive NAND buffer

02                                       Quadruple, 2-input positive NAND buffer

03                                       Quadruple, 2-input positive NAND buffer (open collector output)

04                                       Quadruple, 2-input positive NOR buffer

1.2.2  Device class.  The device class shall be the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outlines.  The case outlines shall be as designated in MIL-STD-1835 and as follows: Outline letter              Descriptive designator                    Terminals              Package style

Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43216-5000, by using the self addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.

AMSC N/A                                                                                                                                             FSC 5962

DISTRIBUTION STATEMENT A.  Approved for public release; distribution is unlimited.