TA8LE III. Group A inspection for device type 02 - Continued.
Symbol |
MIL- STD-833 method |
Cases A, C, D, T, X, and Y |
Terminal conditions 11 |
Measured terminal |
Test limits |
Units |
||||||||||||||||||
Subgroup 12 TA = 25°C |
||||||||||||||||||||||||
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
|||||||||||
Test No. |
1Y |
1A |
18 |
1C |
1D |
NC |
VSS |
NC |
2A |
28 |
2C |
2D |
2Y |
VDD |
Min |
Max |
||||||||
tPHL " " " " " " " |
3003 Fig. 3 " " " " " " |
140 141 142 143 144 145 146 147 |
OUT OUT OUT OUT |
IN GND " " " " " " |
GND IN GND " ‘ " " " |
GND GND IN GND " " " " |
GND GND GND IN GND " " " |
GND " " " " " " " |
GND " " " IN GND GND GND |
GND " " " " IN GND GND |
GND " " " " " IN GND |
GND " " " " " " IN |
OUT OUT OUT OUT |
10.0 V " " " " " " " |
1A to 1Y 18 to 1Y 1C to 1Y 1D to 1Y 2A to 2Y 28 to 2Y 2C to 2Y 2D to 2Y |
6 " " " " " " " |
120 " " " " " " " |
ns " " " " " " " |
||||||
tPLH " " " " " " " |
" " " " " " " " |
148 149 150 151 152 153 154 155 |
OUT OUT OUT OUT |
IN GND " " " " " " |
" IN GND " ‘ " " " |
" " IN GND " " " " |
" " " IN GND " " " |
" " " " " " " " |
" " " " IN GND GND GND |
" " " " " IN GND GND |
" " " " " " IN GND |
GND " " " " " " IN |
OUT OUT OUT OUT |
" " " " " " " " |
1A to 1Y 18 to 1Y 1C to 1Y 1D to 1Y 2A to 2Y 28 to 2Y 2C to 2Y 2D to 2Y |
" " " " " " " " |
" " " " " " " " |
" " " " " " " " |
||||||
tTHL " " " " " " " |
3004 Fig. 3 " " " " " " |
156 157 158 159 160 161 162 163 |
OUT OUT OUT OUT |
IN GND " " " " " " |
GND IN GND " ‘ " " " |
GND GND IN GND " " " " |
GND GND GND IN GND " " " |
GND " " " " " " " |
GND " " " IN GND " " |
GND " " " " IN GND GND |
GND " " " " " IN GND |
GND " " " " " " IN |
OUT OUT OUT OUT |
10.0V " " " " " " " |
1Y 1Y 1Y 1Y 2Y 2Y 2Y 2Y |
5 " " " " " " " |
100 " " " " " " " |
ns " " " " " " " |
||||||
tTLH " " " " " " " |
" " " " " " " " |
164 165 166 167 168 169 170 171 |
OUT OUT OUT OUT |
IN GND " " " " " " |
" IN GND " ‘ " " " |
" " IN GND " " " " |
" " " IN GND GND GND GND |
" " " " " " " " |
" " " " IN GND GND GND |
" " " " " IN GND GND |
" " " " " " IN GND |
GND " " " " " " IN |
OUT OUT OUT OUT |
" " " " " " " " |
1Y 1Y 1Y 1Y 2Y 2Y 2Y 2Y |
" " " " " " " " |
" " " " " " " " |
" " " " " " " " |
11 Pins not designated may be "HIGH" level logic, "LOW" level logic or open. Exceptions are as follows: VIC(pos) tests, the VSS terminals shall be open; VIC(neg) tests, the VDD terminal shall be open; ISS tests, the output terminals shall be open.
21 The ISS measurements shall be performed in sequence.
31 The device manufacturer may, at his option, measure IIL and IIH at 25°C for each individual input or measure all inputs together.
41 See 4.4.1c.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business