INCH-POUND MIL-M-38510/150D
7 February 2005
SUPERSEDING MIL-M-38510/150C
7 November 1985
MILITARY SPECIFICATION
MICROCIRCUITS, DIGITAL, BIPOLAR, TTL, MAGNITUDE COMPARATORS, MONOLITHIC SILICON
Inactive for new design after 8 July 1997.
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF-38535.
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic silicon, Advanced Low Power Scottky TTL, magnitude comparator microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).
1.2 Part or identifying number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types are as follows: Device type Circuit
01 4-bit comparator
02 5-bit comparator
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows:
Outline letter |
Descriptive designator |
Terminals |
Package style |
E |
GDIP1-T16 or CDIP2-T16 |
16 |
Dual-in-line |
F |
GDFP2-F16 or CDFP3-F16 |
16 |
Flat pack |
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense
Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43218-3990, or emailed
to bipolar@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A FSC 5962
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business