MIL-M-38510-148 Microcircuits, Linear, Adjustable, Precision Voltage Reference, Shunt Regulator, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, precision voltage reference. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20

TABLE III. Group A inspection for all device type 01 - Continued. 11

Subgroup	Symbol	Test no.	Conditions R1 = 10 kν, IK = 10 mA unless otherwise specified	Measured value	See figure	Notes	Limits		Unit
Subgroup	Symbol	Test no.		Measured value	See figure	Notes	Min	Max	Unit
4 TA = +25°C	NO	28	IK = 10 mA, BW = 0.1 Hz to 10 Hz	NO	5	41		20.00	∝Vp-p
5 TA = +125°C	VREF 1T	29	VKA = VREF	CALC		VREF = VR1 - VR6	-44.00	44.00	mV
6 TA = -55°C	VREF 1T	30	VKA = VREF	CALC		VREF = VR1 - VR11	-44.00	44.00	mV
	VREF 1T	31	VKA = VREF	CALC		VREF = VR11 - VR6	-44.00	44.00	mV
	VREF 1T	32	R2 = 8	CALC	3	IREF = VR2 - VR3	-3.00	3.00	∝A

11 For devices marked with the "Q" certification mark, the parameters listed herein may be guaranteed if not tested to the limits specified herein in accordance with the manufacturer's QM plan.

21 VKA = VREF ( 1+ (R1 1 R2 )) + IREF x R2 (see figure 3).

31 ZKA = VKA 1 IK, f < 1 kHz.

41 If not tested, shall be guaranteed to the limits specified in table III herein.