INCH-POUND
MIL-M-38510/113C October 3, 2011
SUPERSEDING MIL-M-38510/113B
21 June 2005
MILITARY SPECIFICATION
MICROCIRCUITS, LINEAR, 8 BIT, DIGITAL-TO-ANALOG CONVERTERS, MONOLITHIC SILICON This specification is approved for use by all Departments and Agencies of the Department of Defense.
Reactivated for new design as of 10 February 2005. May be used for either new or existing design acquisition.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF-38535.
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic silicon, 8 bit, digital-to-analog converters. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).
1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types are as follows:
Device type |
Circuit |
|
01 |
D/A Converter, 8 bit, 0.19% linearity |
|
02 |
D/A Converter, 8 bit, 0.11% linearity |
|
1.2.2 |
Device class. |
The device class is the product assurance level as defined in MIL-PRF-38535. |
1.2.3 |
Case outline. |
The case outlines are as designated in MIL-STD-1835 and as follows: |
Outline letter |
Descriptive designator |
Terminals |
Package style |
E |
GDIP1-T16 or CDIP2-T16 |
16 |
Dual-in-line |
1.3 Absolute maximum ratings.
Supply voltage [+VCC - (-VCC)] ......................................................... 36 Vdc Voltage, digital input to negative supply [Vlogic - (-VCC)] ................... 0 to 36 Vdc Voltage, logic control (VLC) ............................................................... -VCC to +VCC Reference voltage input (V14, V15) .................................................... -VCC to +VCC Reference input current (I14) ............................................................ 5.0 mA Reference input differential voltage [(V14 - V15)] .............................. ±18 Vdc Lead temperature (soldering, 60 sec) ............................................. +300°C. Junction temperature (TJ) ................................................................ +175°C
Storage temperature ........................................................................ -65°C to +150°C
Comments, suggestions, or questions on this document should be addressed to: DLA Land Maritime, ATTN: DLA Land Maritime -VAS, P.O. Box 3990, Columbus, OH 43218-3990, or emailed to linear@dscc.dla.mil . Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at https://assist.daps.dla.mil .
AMSC N/A FSC 5962
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business