MIL-M-38510-79 Microcircuits, Digital, Bipolar, Schottky Ttl, Data Selectors/Multiplexers With Three-State Outputs, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, Schottky TTL, data selectors /multiplexers three-state microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.4.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69

MIL-M-38510/790

NOTES:

1.    Connect same load as shown for Y output.

2.    The input pulse has the following characteristics:   tr = tf  ≤ 2.5 ns, PRR  ≤ 1 MHz, and ZOUT  � 50 Ω.

3.    CL includes probe and jig capacitance.

4.    All diodes are 1N3064 or equivalent.

5.    Load circuit is required on a given output only where table III indicates "OUT" on that output.

Load circuits may otherwise be omitted.

A.    Output 1 is for an output with internal conditions such that the output is low except when disabled by the output control.

B.    Output 2 is for an output with internal conditions such that the output is high except when disabled by the output control.

6.    Manufacturer may test with either the standard load circuit or the alternate load circuit at his option.

FIGURE 7.  Switching time test circuits and waveforms for device type 05.

21