MIL-M-38510-762 Microcircuits, Digital, Advanced Cmos, Multiplexers, Monolithic Silicon, Positive LogicThis specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance RHA are provided and are reflected in the complete Part or Identifying Number PIN. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22

INCH-POUND

MIL-M-38510/7628

6 May 2005         SUPERSEDING

MIL-M-38510/762A

14 October 1997

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, ADVANCED CMOS, MULTIPLEXERS, MONOLITHIC SILICON, POSITIVE LOGIC

Reactivated after 06 May 2005 and may be used for new and existing designs and acquisitions

This specification is approved for use by all Departments and Agencies  of the  Department of  Defense.

The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN).  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

1.2   Part or identifying number (PIN).  The PIN is in accordance with MIL-PRF-38535 and as specified herein.

1.2.1  Device types.  The device types are as follows:

Device type                                                   Circuit

01                                               Eight input multiplexer

02                                               Dual 4-input multiplexer

03                                               Quad two-input multiplexer

04                                               Quad two-input multiplexer with inverted outputs

05                                               Eight-input multiplexer with three-state outputs

06                                               Dual four-input multiplexer with three-state outputs

07                                               Quad two-input multiplexer with three-state outputs

08                                               Quad two-input multiplexer with inverted three-state outputs

1.2.2  Device class.  The device class is the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outlines.  The case outlines are as designated in MIL-STD-1835 and as follows:

Outline letter          Descriptive designator                             Terminals                        Package style

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, P.O. 8ox 3990, Columbus, OH 43218-3990, or email mailto:CMOS@dscc.dla.mil.  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.

AMSC N/A                                                                                                                                       FSC 5962