MIL-M-38510/70C
1.2.3 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows:
Outline letter Descriptive designator Terminals Package style
A |
GDFP5-F14 or CDFP6-F14 |
14 |
Flat pack |
B |
GDFP4-F14 |
14 |
Flat pack |
C |
GDIP1-T14 or CDIP2-T14 |
14 |
Dual-in-line |
D |
GDFP1-F14 or CDFP2-F14 |
14 |
Flat pack |
E |
GDIP1-T16 or CDIP2-T16 |
16 |
Dual-in-line |
F |
GDFP2-F16 or CDFP3-F16 |
16 |
Flat-pack |
x |
CQCC2-N20 |
20 |
Square chip carrier |
2 |
CQCC1-N20 |
20 |
Square chip carrier |
1.3 Absolute maximum ratings.
Supply voltage range ...................................................... -0.5 V dc to +7.0 V dc
Input voltage range ......................................................... -1.2 V dc at -18 mA to 5.5 V dc
Storage temperature range ............................................ -65°C to +150°C
Maximum power dissipation per gate, (PD) 1/
Device types 01 thru 07 ........................................... 49.5 mW
Device type 08 and 09 ............................................. 55.0 mW Device type 10 ........................................................ 138.0 mW
Lead temperature (soldering 10 seconds) ...................... 300°C
Thermal resistance, junction-to-case (eJC) .................... (See MIL-STD-1835) Junction temperature (TJ ) 2/ ......................................... 175°C
1.4 Recommended operating conditions.
Supply voltage (VCC) ...................................................... 4.5 V dc minimum to 5.5 V dc maximum
Minimum high level input voltage (VIH) ........................... 2.0 V dc
Maximum low level input voltage (VIL) 3/ ....................... 0.8 V dc
Case operating temperature range (TC ) ......................... -55°C to 125°C
2.0 APPLICABLE DOCUMENT
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
1/ Must withstand the added PD due to short circuit condition (e.g. IOS).
2/ Maximum junction temperature should not be exceeded except in accordance with allowable short
duration burn-in screening condition in accordance with MIL-PRF-38535.
3/ VIL = 0.7 V dc at +125°C.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business