MIL-M-38510-324 Microcircuits, Digital, Bipolar, Low-Power Schottky Ttl, Octal Buffer Gates With Three State Outputs, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, octal bus buffer gates with three state outputs. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29

MIL-M-38510/324D

6.5  Abbreviations, symbols, and definitions.  The abbreviations, symbols, and definitions used herein are defined in MIL-PRF-38535, MIL-HDBK-1331, and as follows:

GND  ...........................................  Ground zero voltage potential.

VIN  ...............................................  Voltage level at an input terminal.

IIN  ................................................  Current flowing into an input terminal.

tPHZ  ..............................................  Output disable time from high level.  The time between the specified reference points on the input and output voltage waveforms with the three

state output changing from the defined high level to a high impedance

(off) state.

tPLZ  ..............................................  Output disable time from low level.  The time between the specified reference points on the input and output voltage waveforms with the three state output changing from the defined low level to a high impedance

(off) state.

tPZH  ..............................................  Output enable time to high level.  The time between the specified reference points on the input and output voltage waveforms with the three state output changing from a high impedance (off) state to the defined

high level.

tPZL  ..............................................  Output enable time to low level.  The time between the specified

reference points on the input and output voltage waveforms with the three

state output changing from a high impedance (off) state to the defined low level.

IOZL  ..............................................  Output current in the high impedance mode with the output voltage low. IOZH   .............................................  Output current in the high impedance mode with the output voltage high.

6.6  Logistic support.  Lead materials and finishes (see 3.4) are interchangeable.  Unless otherwise specified, microcircuits acquired for Government logistic support will be acquired to device class B (see 1.2.2), lead material and finish A (see 3.4).  Longer length leads and lead forming should not affect the part number.

6.7  Substitutability.  The cross-reference information below is presented for the convenience of users. Microcircuits covered by this specification will functionally replace the listed generic-industry type.  Generic-industry microcircuit types may not have equivalent operational performance characteristics across military temperature

ranges or reliability factors equivalent to MIL-M-38510 device types and may have slight physical variations in relation to case size.  The presence of this information should not be deemed as permitting substitution of generic-industry types for MIL-M-38510 types or as a waiver of any of the provisions of MIL-PRF-38535.

27