MIL-M-38510/155C
1.3 Absolute maximum ratings.
Supply voltage range .................................................................... -0.5 V dc to +7.0 V dc
Input voltage range ....................................................................... -1.5 V dc at -8 mA to +5.5 V dc
Storage temperature range .......................................................... -65°C to +150°C Maximum power dissipation per gate (PD) ................................... 88 mW dc 2/
Lead temperature (soldering, 10 seconds) ................................... +300°C
Thermal resistance, junction to case (eJC):
Cases A, B, C, D ........................................................................ See MIL-STD-1835
Junction temperature (TJ) ............................................................ +175°C
1.4 Recommended operating conditions.
Supply voltage (VCC) ................................................................... 4.5 V dc minimum to 5.5 V dc maximum
Maximum high level input voltage (VIH) ........................................ 5.0 V dc Minimum high level input voltage (VIH) ........................................ 2.0 V dc Maximum low level input voltage (VIL) ......................................... 0.8 V dc Minimum low level input voltage (VIL) .......................................... 0.0 V dc
Normalized fanout (each output) .................................................. 10 maximum 3/
Case operating temperature range (TC) ....................................... -55°C to +125°C
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications and standards form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATION
MIL-PRF-38535 - Integrated Circuits (Microcircuits) Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-883 - Test Method Standard for Microelectronics.
MIL-STD-1835 - Interface Standard Electronic Component Case Outlines
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.3 Order of precedence. In the event of a conflict between the text of this specification and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
2/ Must withstand the added PD due to short-circuit conditions (e.g., IOS) at one output for 5 seconds.
3/ The device shall fanout in both high and low levels to the specified number of inputs of the same device type as
that being tested.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business