MIL-M-38510/151B
1.3 Absolute maximum ratings.
Supply voltage range ................................................................. -0.5 V dc to 7.0 V dc
Input voltage range ..................................................................... -1.5 V dc at -12 mA to 5.5 V dc
Storage temperature range ....................................................... -65°C to 150°C Maximum power dissipation (PD) ................................................ 176 mW dc 1/ Lead temperature (soldering, 10 seconds) ................................. +300°C
Thermal resistance, junction-to-case (eJC):
Cases A, B, C, D ................................................................... See MIL-STD-1835
Junction temperature (TJ) .......................................................... +175°C 2/
1.4 Recommended operating conditions.
Supply voltage (VCC) ..................................................................... 4.5 V dc minimum to 5.5 V dc maximum Positive-going threshold voltage .................................................. 1.5 V dc minimum to 2.0 V dc maximum Negative-going threshold voltage ................................................ 0.6 V dc minimum to 1.1 V dc maximum Normalized fanout (each output) .................................................. 10 maximum 3/
Case operating temperature range (TC) ........................................ -55°C to +125°C
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications and Standards. The following specifications and standards form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-PRF-38535 - Integrated Circuits (Microcircuits) Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-883 - Test Method Standard for Microelectronics.
MIL-STD-1835 - Interface Standard Electronic Component Case Outlines.
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.
2.2 Order of precedence. In the event of a conflict between the text of this specification and the references cited herein the text of this document shall takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
1/ Must withstand the added PD due to short circuit conditions (e.g. IOS) at one output for 5 seconds.
2/ Maximum junction temperature shall not be exceeded except for allowable short duration burn-in screening per method 5004 of MIL-STD-883.
3/ The device shall fanout in both high and low levels to the specified number of inputs of the same device type as that being tested.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business