MIL-M-38510-151 Microcircuits, Digital, Bipolar, Ttl, Schmitt-Trigger Nand Gates, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon line, TTL, Schmitt-Trigger, positive NAND logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17

INCH-POUND MIL-M-38510/151B

19 January 2005

SUPERSEDING MIL-M-38510/151A

30 September 1985

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, BIPOLAR, TTL, SCHMITT-TRIGGER NAND GATES, MONOLITHIC SILICON Inactive for new design after 8 July 1997

This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF-38535

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon line, TTL, Schmitt-Trigger, positive NAND logic gating microcircuits.  Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number.  For this product, the requirements of MIL-M-

38510 have been superseded by MIL-PRF-38535, (see 6.3)

1.2  Part or Identifying Number (PIN).  The PIN is in accordance with MIL-PRF-38535, and as specified herein.

1.2.1  Device types.  The device types should be as follows: Device type                                                   Circuit

01                                    Dual, 4-input positive NAND gate, Schmitt-Trigger

02                                    Hex, 1-input inverter gate, Schmitt-Trigger

03                                    Quadruple, 2-input positive NAND gate, Schmitt-Trigger

1.2.2  Device class.  The device class is the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outlines.  The case outlines are as designated in MIL-STD-1835 and as follows: Outline letter          Descriptive designator                  Terminals                    Package style

1/  Inactive package case outline.

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43218-3990, or email mailto:bipolar@dscc.dla.mil.  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil .

AMSC N/A                                                                                                                                           FSC 5962