MIL-M-38510-131 Microcircuits, Linear, Low Noise Operational Amplifiers, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, low noise operational amplifiers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22

MIL-M-385101131A

TABLE I. Electrical performance characteristics - Continued.

Test	Symbol	Conditions -55°C = TA = +125°C ±VCC = ±15 V, see figure 3 and paragraph 3.5 unless otherwise specified	Group A subgroups	Device type	Limits		Unit
Test	Symbol		Group A subgroups	Device type	Min	Max	Unit
Broadband input noise voltage	NI(BB)	f = 10 Hz - 10 kHz, RS = 50 ν, see fig. 7	7	01,02		500	nV rms
Channel separation	CS	See fig. 8	7	02	80		dB

11 Tested at a) VCM = 0 V, VCC = ±5 V, b) VCM = ±12 V, VCC = ±15 V, c) VCM = 0 V, VCC = ±15 V.

21 VOUT = 0 to +10 for AVS(+) and VOUT = 0 to -10 for AVS(-). RL = 600 ν for device type 01 and

RL = 2 kν for device type 02.

31 Tested at a) VCC = ±5 V, VOUT = ±2 V, RL = 600 ν for device type 01, b) VCC = ±5 V, VOUT = ±2 V, RL = 2000 ν for device types 01 and 02.

41 Continuous short circuit limits are considerably less than the indicated test limits since maximum power dissipation cannot be exceeded.