MIL-M-38510-112 Microcircuits, Linear, Voltage Comparators, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, voltage comparators. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26

MIL-M-38510/112B

NOTES:

1 All resistor are ±0.1% tolerance and all capacitor are ±10% tolerance.

2 Precautions shall be taken to prevent damage to the D.U.T. during insertion into socket and change of state of relays (i.e. disable voltage supplies, current limit ±VCC, etc.).

3 All relays are shown in the normal de-energized state. The following table shall be used to determine which relays to energize for each test. (For device type 02, use tests 87 and 90 only.)

Channel sep.

test no.

Channels

tested

Relays energized

Driven channel Monitored channel

A to B

A to C A to D

2,3,4,6,8

9,12,13,14,15

17,20,21,22,23

25,28,29,30,31

B to A

B to C B to D

10,11,12,14,16

1,4,5,6,7

17,20,21,22,23

25,28,29,30,31

C to A

C to B C to D

18,19,20,22,24

1,4,5,6,7

9,12,13,14,15

25,28,29,30,31

D to A

D to B D to C

26,27,28,30,32

1,4,5,6,7

9,12,13,14,15

17,20,21,22,23

4 The nulling amplifier shall be a JM38510/10101XXX or equivalent. Saturation of the nulling amplifier is not allowed.

FIGURE 4. Channel separation test circuit. - Continued.