MIL-M-38510-1 Microcircuits, Digital, Ttl, Nand Gates, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, TTL, positive NAND logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29

MIL-M-38510/1F

1.3  Absolute maximum ratings.

Supply voltage range ..............................................................................-0.5 V to +7.0 V

Input voltage range .................................................................................-1.5 V at -12 mA to +5.5 V Storage temperature range  .................................................................... -65° to +150°C

Maximum power dissipation per gate (PD)  1/.......................................... 40 mW

Lead temperature (soldering, 10 seconds) ............................................. 300°C

Thermal resistance, junction to case (eJC)  ............................................. (See MIL-STD-1835) Junction temperature (TJ)  2/................................................................... 175°C

1.4  Recommended operating conditions.

Supply voltage........................................................................................  +4.5 V minimum to +5.5 V maximum

Minimum high level input voltage  ..........................................................  +2.0 V Maximum low level input voltage (VIL)  ...................................................  +0.8 V Normalized fanout (each output)  3/ ........................................................  10 maximum Case operating temperature range ......................................................... -55° to +125°C

1/  Must withstand the added PD  due to short-circuit test (e.g., IOS).

2/  Maximum junction temperature shall not be exceeded except for allowable short duration burn-in

screening conditions in accordance with MIL-PRF-38535.

3/  Device will fanout in both high and low levels to the specified number of inputs of the same device type as that being tested.

2

Source:  https://assist.dla.mil  --  Downloaded: 

Check  the  source  to  verify  that  this  is  the  current  version  before  use.

For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business