MIL-M-38510-1 Microcircuits, Digital, Ttl, Nand Gates, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, TTL, positive NAND logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29

INCH-POUND MIL-M-38510/1F

16 March 2005

SUPERSEDING MIL-M-38510/1E

1 June 1982

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, TTL, NAND GATES, MONOLITHIC SILICON

Inactive for new design as of 6 October 1995

This specification is approved for use by all Departments and  Agencies  of the  Department of  Defense.

The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon, TTL, positive NAND logic gating microcircuits.  Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number.  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

1.2  Part or Identifying Number (PIN).  The PIN  is in accordance with MIL-PRF-38535, and as specified herein.

1.2.1  Device types.  The device types are as follows:

Device type                                                   Circuit

01                                       Single, 8-input positive NAND gate

02                                       Dual, 4-input positive NAND gate

03                                       Triple, 3-input positive NAND gate

04                                       Quadruple, 2-input positive NAND gate

05                                       Hex, 1-input inverter gate

06                                       Triple, 3-input positive NAND gate (open collector output)

07                                       Quadruple, 2-input positive NAND gate (open collector output)

08                                       Hex, 1-input inverter gate (open collector output)

09                                       Same as device type 07, except different pin connections

1.2.2  Device class.  The device class is the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outlines.  The case outlines are as designated in MIL-STD-1835 and as follows: Outline letter               Descriptive designator                    Terminals              Package style

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, P.O. Box 3990, Columbus, OH 43218-3990, or emailed to bipolar@dla.mil .  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil .

AMSC N/A                                                                                                                                             FSC 5962