MIL-M-38510-758 Microcircuits, Digital, Advanced, Cmos, Decoder/Demultiplexer, Monolithic Silicon, Positive LogicThis specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance RHA are provided and are reflected in the complete Part or Identifying Number PIN. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21

MIL-M-38510/758B

TABLE I. Electrical performance characteristics - Continued.

Test and MIL-STD-883 test method	Symbol	Test conditions 1/ -55°C ≤ TC ≤ +125°C 3.0 V ≤ VCC ≤ 5.5 V unless otherwise specified		Device type 2/	VCC	Group A subgroups	Limits 1/		Unit
							Min	Max
Truth table test output voltage 3014	4/ 5/ 9/	VIH = 2.50 V VIL = 0.45 V verify output VO	M	02, 03	3.0 V	7	L	H
			D				L	H
			P, L, R				L	H
		VIH = 3.70 V VIL = 0.60 V verify output VO		All	4.5 V	7,8	L	H
Propagation delay time, An to On 3003	tPHL1, tPLH1 4/ 5/ 10/ 11/	CL = 50 pF RL = 5000 see figure 3		02	3.0 V	9, 11	1.0	13.0	ns
						10	1.0	16.0
				03		9, 11	1.0	11.5
						10	1.0	14.5
			M	02		9	1.0	13.0
				03			1.0	11.5
			D	02			1.0	13.0
				03			1.0	11.5
			P, L, R	02			1.0	13.0
				03			1.0	11.5
		CL = 50 pF RL = 5000 see figure 3		02	4.5 V	9, 11	1.0	10.0	ns
						10	1.0	12.0
				03		9, 11	1.0	9.0
						10	1.0	11.0
			M	02		9	1.0	10.0
				03			1.0	9.0
			D	02			1.0	10.0
				03			1.0	9.0
			P, L, R	02			1.0	10.0
				03			1.0	9.0
Propagation dela y tim e, EA, EB, E1 or E2 to On 3003	tPHL2, tPLH2 4/ 5/ 10/ 11/	CL = 50 pF RL = 5000 see figure 3		02	3.0 V	9, 11	1.0	15.0	ns
						10	1.0	16.5
				03		9, 11	1.0	12.0
						10	1.0	14.5
			M	02		9	1.0	15.0
				03			1.0	12.0
			D	02			1.0	15.0
				03			1.0	12.0
			P, L, R	02			1.0	15.0
				03			1.0	12.0
		CL = 50 pF RL = 5000 see figure 3		02	4.5 V	9, 11	1.0	11.5	ns
						10	1.0	13.0
				03		9, 11	1.0	8.5
						10	1.0	11.0
			M	02		9	1.0	11.5
				03			1.0	8.5
			D	02			1.0	11.5
				03			1.0	8.5
			P, L, R	02			1.0	11.5
				03			1.0	8.5

See footnotes at end of table.